HVS-1000视屏测量显微硬度计 本系列视屏测量显微硬度计是在显微硬度计上，通过CCD彩色摄像头光学接口，直接能在显示屏上测量完成。增加了测试的速度和灵活性，提高了测量精度，体现了像质的清晰度，减少了目镜系统人为的操作误差，能满足各种显微硬度测试要求。适用范围热处理、碳化、淬火硬化层，表面覆层，钢，有色金属，微小及薄形零件等。This design is based on HVS-series vickers hardness tester added with CCD camera.15" TV which shows the measured picture. increased the accuracy of the measurement shows the clear view of picture ａnd decrease the error due to the human operation .therefore upon the release .it is welcomed by the university science unit state ａnd private owned enterprises. as well as foreign company.Usage Range:Heat treated layer carbonized layer hardened hard layers superficial coating steels non-ferrous metal micro ａnd thin shaped components. 技术数据(Technical Specifications)试验力(Testing Force)10gf (0.098N）、25gf (0.245N)、50gf (0.49N)、100gf (0.98N )、200gf (1.96N)、300gf (2.94N)、500gf (4.9N)、1000gf (9.8N)转换标尺(Exchanging Scales)洛氏、表面洛氏、布氏 ( Rockwell Superficial Rockwell Brinell)小测量单位(Min Measuring Unit)0.031μm总放大倍数Magnification of Microscope100X（观察 For Observation ）400X（测量 For Measurement）数据输出 (Data Output)内置打印机和RS-232接口 ( Inside Printer and RS-232 Interface)加荷控制(Loading Control)自动（加荷、保荷、卸荷） Automatically (load keep unload)保荷时间（Dutation Time）0～60sec selectable仪器尺寸(Overall Dimension)405×290×480mm （长×宽×高 L X W X H）仪器重量( Net Weight )25kg试件高度(Max. Height of Specimen)85mm压头中心到机身距离(Max. Height of Speciments)95mm电源(Power Supply)AC220V±5%，50~60Hz执行标准(Carried Standard)GB/T4340.2标准(GB/T4340.2 Chinese Standard) JJG151检定规程 ( JJG151 Inspection Rule )标准配件 附件Standard Accessories物镜40x、10x，微氏压头，测量目镜10x，标准硬度块（2），薄形试台、圆柱体试台、平口试台，水平仪，电源线，辅助工具等Objectives 40x and 10x Vickers Indenter Microscope 10x Standard Hardness Brocks: 2 pcs Thin Specimen Testing Table Column Testing Table Forcipate Testing Table Lever Power Cable Assistant Tools etc