CBM-SR38 张力计 CBM-SR38 拉力计

深圳市汉斯福特科技有限公司

杨工

：

手机：

：

Q Q: 1138493826

公司地址：龙华新区大浪街道大浪社区伟达工业园A栋2楼

公司网址：www.huntsort.com

概述

CBM-SR38 张力计 CBM-SR38 张力仪

张力仪有机械式和电子式两种，测量张力的单位用牛顿/厘米表示。张力也可以用相对数值来表示。厘米张力仪就是用相对数值表示张力的一种，是通过张力仪自身重量使丝
网下沉的深度的数值(毫米)来计算，张力数值可从指示盘上直接得到，或者从控制盘上间接得到。张力仪有手工操作和机械操作两种。张力仪是检验丝网印版质量的重要的
检测仪器。为保证得到制版要求的张力，在绷网过程中或绷网后都要使用张力仪测量。

For material diameters: 7 Models up to 46 mm Diameter (up to 1-3/4")

Capacities up to 20,000 Kg (44,000lbs or 200kN)

The new Cable Bull Checkline CBM Cable Tension Meter is a new innovative solution for hand-held portable tension measurement. The unique design allows for measurement of any material diameter between 1 up to 46 mm without custom programming or setup. Suitable for use on all types of materials including wire rope, synthetic cable, bare or insulated wires.

Check-Line CBM Designed for measuring wires & cables that are anchored/fixed at both ends (closed system) as well as running lines. Also commonly used on Kevlar, fiberglass and other hi-strength materials when used in a similar applications. This CBM can also be considered a Rope Tension Meter designed to measure the static tension in wire ropes, cables, guy wires, belts, ...

Applications include guy wires, support cables, tethers, elevator load measuring, tension equalization in elevator ropes, rope sets, service lifts inside wind turbine systems, tensioning, protecting cranes and hoists from overload, tension measurement in stay ropes / cables, suspension ropes and railway catenary ropes, vehicle pull test, for safe loading in material handling, load securing control, tension control of lashing straps, equalize loadings on multi-cable assemblies, and much more.

特性

CBM-SR38 张力计 CBM-SR38 张力仪

1. No calibration or programming required for specific cable diameter or wire construction

2. Sophisticated roller geometry allows the CBM to measure with an error of less than 1%.

3. Choice of "front side" or "rear side" position of Lever-Lock mechanism which opens and closes the measuring system

4. High precision fabrication from Stainless Steel and Aluminum for trouble-free use even in the toughest in-field applications

5. Connects to lightweight, battery-powered tension indicator for maximum portability and ease of use

6. Can be used on cable diameters below and above specified range with only small additional inaccuracy

参数

CBM-SR38 张力计 CBM-SR38 张力仪

订货型号

CBM-SR38 张力计 CBM-SR38 张力仪

CBM-SR8 for samples diameters 1 up to 8 mm

for sample diameters 4 up to 12mm

CBM-SR16 for sample diameters 8 up to 16 mm

CBM-SR22 for sample diameters 14 up to 22 mm

CBM-SR30 for sample diameters 20 up to 30 mm

CBM-SR38 for sample diameters 28 up to 38 mm

CBM-SR46 for sample diameters 36 up to 46 mm

相关型号

DMS485 Handheld Amplifier