NADL-H Cable Identification Device NADL-H电缆识别仪

NABLC-III Zinc Oxide Arrestor Characteristics Test Device NABLC-III氧化锌避雷器测试仪

产品简介

NABLC-III氧化锌避雷器测试仪是用于检测氧化锌避雷器电气性能的*仪器，该仪器适用于各种电压等级的氧化锌避雷器的带电或停电检测，从而及时发现设备内部绝缘受潮及阀片老化等危险缺陷。

NABLC-III氧化锌避雷器测试仪操作简单、使用方便，测量全过程由单片机控制，可测量氧化锌避雷器的全电流、阻性电流及其谐波、工频参考电压及其谐波、有功功率和相位差，大屏幕可显示电压和电流的真实波形。仪器运用数字波形分析技术，采用谐波分析和数字滤波等软件抗干扰方法使测量结果准确、稳定，可准确分析出基波和3～7次谐波的含量，并能克服相间干扰影响，正确测量边相避雷器的阻性电流。本机配有高速面板式打印机，可充电电池，试验人员在现场使用十分方便。仪器采用的高速磁隔离数字传感器直接采集输入的电压、电流信号，保证了数据的可靠性和安全性。

产品别名

氧化锌避雷器测试仪，氧化锌避雷器特性测试仪，氧化锌测试仪，避雷器阻性泄漏电流检测仪，氧化锌避雷器带电测试仪

产品特性

1）NABLC-III氧化锌避雷器测试仪采用大屏幕液晶显示，中英文菜单操作，使用简便。

2）*采样、处理电路，*的付里叶谐波分析技术，确保数据更加可靠。

3）仪器采用的高速磁隔离数字传感器直接采集输入的电压、电流信号，保证了数据的可靠性和安全性。

4）支持无线同步电压取样方式。

5）具有阻性电流基波峰值输出、边相校正等功能。

6）仪器配有可充电电池、日历时钟、*打印机，可存储120组测量数据。

产品参数

Product introduction

NABLC-III zinc oxide arrester detector is a special instrument for detecting electrical properties of zinc oxide surge arresters. The instrument is suitable for charging or power outage detection of various voltage levels of zinc oxide surge arresters, timely detection of equipment internal insulation damp and valve aging and other dangerous defects.

NABLC-III zinc oxide arrester detector is simple and easy to operate, the entire measuring process is controlled by microcontrollers to measure the full current, resistive current and its harmonics, frequency reference voltage and its harmonics, active power and phase difference of zinc oxide surge arrester, a large screen can display the real waveform of voltage and current.

The instrument is adopt with digital waveform analysis techniques, used harmonic analysis and digital filtering software such as anti-jamming method to make the test result accurate and stable, it not only can accurately analysis the fundamental and the content of 3 to 7 times of harmonic, but also can overcome the influence of the interphase interference to rightly measuring the resistive current of edge phase arrester.

The instrument is equipped with high-speed printer panel, rechargeable battery, it is very convenient to test in the field. It uses a unique high-speed magnetic isolation digital sensor to directly collect the signal of input voltage and current, ensure the data reliability and security.

Also calledname

Zinc oxide arrester tester, intelligent arrester tester, anti-interference characteristics of zinc oxide arrester tester, leakage current arrester resistive detector, zinc oxide arrester tester charged, zinc oxide surge arresters without gaps for ac tester, zinc oxide arrester tester

The Characteristics of the products

1.A large-screen LCD display, easy to operate.

2.Adopting high-precision sampling, processing circuitry, advanced Fourier harmonic analysis techniques to ensure the data is more reliable.

3.Using a unique high-speed magnetic isolation digital sensor to directly collect the signal of input voltage and current, ensure the data reliability and security.

4.Support wireless synchronization voltage sampling way.

5.With the function of fundamental peak output of resistive current, edge phase correction and so on.

6.The instrument is equipped with a rechargeable battery, calendar clock, mini printer, it can store 120 sets of measurement data;

The parameters of the products

(1) Measurement range of full current: 0-10mA RMS, 50Hz/ 60Hz; Accuracy: ± (reading x5% + 5 μA)

(2) Measurement accuracy of fundamental resistive current (secondary law without interphase interference): ± (reading x5% +5 μA)

(3) Accuracy of current harmonics: ± (reading x 10% +10 μA)

(4) Input range of reference voltage: 25V ~ 250V RMS, total harmonic content < 30%, 50Hz/ 60Hz

(5) Measurement accuracy of reference voltage: ± (reading × 5% +0.5 V)

(6) Measurement accuracy of voltage harmonics: ± (reading × 10%)

(7) The angle of fundamental current and voltage Φ: 0 ~ 360°

(8) Battery working time: Host 6 hours

Charging power: 220V ± 10% 50Hz/ 60Hz Charging time: 5 hours

(9) Dimensions: 325mm x280mm x140mm

(10) Weight: 3.5Kg (do not include cable)

(11) Operating environment: Temperature: -10-50 ℃ Relative humidity: < 90%

Product information

1, Taken from the PT secondary voltage reference, you should carefully check the wiring to avoid PT secondary circuit.

2, The voltage signal input line and the current signal input line must not be reversed, if the current signal input line connected to PT3, test transformer secondary side or measuring end, it may burn the instrument.

3, Where the input voltage and input current circumstances, do not plug the measuring line, so as not to burn the instrument.

4, The instrument is damaged, stop using it immediately and notify the Company and do not repair yourself out of the box. When the instrument is not working properly, first check the power fuse is blown. After replacement of the same model can continue the insurance experiment. If the problem is more complex, please contact me directly.

5, The instrument must not be placed in humid and high temperature environments.

6, The instrument is not used as a long time (more than three months), the battery will run out of damage, so each interval of 3 months should be given to the instrument one charge (6 hours or more), in order to ensure that the instrument can be used normally. Charging steps: Turn the power switch, plug in 220V power until the battery is indicating below the LCD screen 90% or more.