进口离心管道清水泵

进口离心管道清水泵产品概述：

进口离心管道清水泵是单吸单级离心泵，单级离心泵主要由电动机、水泵、密封三部分组成。电动机均为单相异步电动机；水泵与电动机之间装有单端面机械密封，固定止口密封处采用“O”形耐油橡胶密封圈作静密封。进口离心管道清水泵具有体积小，重量轻、结构紧凑、安装简单方便的特点，是一种理想的*节能型家用电泵，广泛应用于农田灌溉、喷灌、园林喷浇灌、蔬菜大棚供水、养殖业给排水以及井用提水、自来水加压等家庭生活用水之场合。

进口离心管道清水泵,离心水泵 离心式清水泵简称“离心泵”,它是一种利用水的离心运动的抽水机械。由泵壳、叶轮、泵轴、泵架等组成。离心水泵起动前应先往泵里灌满水，起动后旋转的叶轮带动泵里的水高速旋转，水作离心运动，向外甩出并被压入出水管。

进口离心管道清水泵工作原理：

进口离心管道清水泵是小型的离心式清水泵，能实现小流量小扬程等适合于家庭使用的环境。该清水电泵在下列使用条件下应能连续正常工作：
1、介质温度不超过+40℃；
2、介质的PH值为6.5～8.5之间；
3、固体杂质的体积比不超过0.1%，粒度不大于0.2mm；
4、电源频率为50Hz，电压为单相交流220V，电压波动范围为额定值的0.9～1.1倍。

进口离心管道清水泵技术参数：

泵出口直径 DN 80~800mm 流量 Q ≤11600m3/h
扬程 H ≤200m 工作温度 T ≤105℃
固体颗粒 ≤80mg/L工作许用压力 ≤25许用试验压力 ≤37.5

进口离心管道清水泵工作条件：

流量范围:0.8m3/h~120 m3/h;扬程范围:5.6m~330m;
温度范围:-20℃~120℃;输送液体种类:各种清洁水及轻腐蚀液体;泵腔承压:≤4.0MPa。

进口管道离心泵产品特点：

l、泵结构紧凑、体积小、外形美观。其立式结构重心较低且重心合于泵脚中心，增强了泵的运行稳定性和寿命。
2、安装方便。进出口径相同并在同一中心线上，可像阀门一样直接安装在管路任何部位。电机加上防雨罩可置于户外使用。泵设有安装底脚，以便泵的安装稳定。
3、运行平稳、噪音低、组件同心度高。电机采用低噪音轴承，并设有不停机加油装置，泵叶轮具有极好的动静平衡，运行无振动，改善使用环境。
4、无渗漏。轴封采用耐腐*硬质合金机械密封，解决了离心泵填料严重渗漏问题，延长了使用寿命，确保了运行场地干净整洁：
5、维修方便。勿需拆卸管道，只要拆下泵盖螺母，取出电机及传动组件即可进行检修维护。
6、可根据现场使用条件，泵机可立式、卧式、多方式安装，依据流量扬程要求，采用并、串联方法，增加所需流量扬程

进口离心管道清水泵应用领域：

泵的零件用不锈钢板压制,经激光焊接而成,并有多种牌号的不锈钢可供选用,因而单级离心泵的用途十分广泛,主要适用于输送各种洁净水及轻腐蚀液体,可用于 住宅供水及增压,工业锅炉给水,空调系统循环体会水,水处理和反渗透系统,食品工业,医药工业用水

进口离心管道清水泵德国巴赫BACH售后服务：

的服务铸就的企业让客户无后顾之忧。
1、按合同要求提供产品的合格证、铭牌、检验报告、产地证名、安装说明书等。
2、顾客在验收产品过程中，如出现与合同要求不符时，我司接到顾客通知后两小时内给予处理。
3、我司提供十二个月以上产品质保期，时间从验收合格之日起计算。
4、在正确安装和使用下，出现产品质量问题，本公司将负责到底。

选择德国巴赫的四大理由：

1：进步性持续性

回顾巴赫在中国的快速进步性每年均高速增长，可预见一家大型的生产销售企业的建立与发展，也必将在中国的阀门市场乃至机械行业的有所建树。

2：可靠性

德国巴赫的可靠性与产品之性能是公司经营理念重要组成部分。如期发货，持续经营，高质量，均经过严格的全面测验。这就是巴赫为何能高速发展，并且能提供越来越好的高质量产品，质服务的原因。

3：价格

现代化工厂高端自动化数控生产线确保阀门与其配件价格合理，品质优良。

和持续不断地投资于人力，设备厂房，为用户提供性价格比高，品质优良的阀门。

4：客户价值观

通过集中采购可以降低总体的采购成本。

便捷的采购，有助于客户优化配置人力资源，达到精简*。

借助巴赫充足的库存小化客户的库存投入。

*的阀门将帮助避免因伪劣产品而导致的停产停工误工。

import centrifugal pipeline clean water pump

Overview of imported centrifugal pipeline cleaning pump products:

The imported centrifugal pipeline clean water pump is a single-suction single-stage centrifugal pump. The single-stage centrifugal pump consists of three parts: motor, water pump and seal. Motors are single-phase asynchronous motors; The pump and motor are sealed with a single end face, and the "O" oil resistant rubber seal is used for the static seal. imported centrifugal pipeline pump has small volume, light weight, compact structure, simple installation, convenient features, is a kind of ideal efficient household electric pump, widely used in spray irrigation, sprinkler irrigation, garden irrigation water supply, aquaculture, water supply and drainage, vegetable greenhouses and well with the family life such as water, tap water pressure of water.

Centrifugal pump centrifugal pump centrifugal pump is called centrifugal pump. It is a pumping machine which USES water centrifuge. It consists of pump shell, impeller, pump shaft, pump frame, etc. The centrifugal water pump should be filled with water before starting, and the rotating impeller drives the water in the pump to rotate in high speed. The water will be spun out and pushed out of the water pipe.

Principle of imported centrifugal pipeline cleaning pump:

imported centrifugal pipeline clean water pump is a small centrifugal water pump, which can realize small flow small lift and other suitable for domestic use. The water pump should be able to work continuously under the following conditions:

1, medium temperature shall not exceed + 40 ℃;

2. The PH of the medium is between 6.5 and 8.5;

3. The volume ratio of solid impurities is less than 0.1%, and the particle size is not greater than 0.2mm.

4. The power frequency is 50Hz, the voltage is single phase ac 220V, and the voltage fluctuation range is 0.9 ~ 1.1 times of the rating value.

Technical parameters of imported centrifugal pipeline cleaning pump:

Pump outlet diameter DN 80 ~ 800mm flow Q less than 11600m3 / h

Lift H 200 T m working temperature 105 ℃ or less or less

The pressure of the solid particles is less than or equal to the pressure of 25

Working conditions of imported centrifugal pipeline cleaning pump:

Flow range: 0.8 m3 / h ~ 120 m3 / h; Range of lift: 5.6 m ~ 330m;

Temperature range: - 20 ℃ ~ 120 ℃; Type of liquid conveying: various clean water and light etching liquid; Pump chamber pressure: less than 4.0 MPa.

Characteristics of centrifugal pump product of imported pipeline:

L, compact structure, small volume, beautiful appearance. Its vertical center of gravity is low and its center of gravity is in the center of the pump, which increases the operation stability and life of the pump.

2. Convenient installation. Access to the same calibre and in the same Central Line, can be installed directly in any part of the pipe like a valve. Motor and rain-proof cover can be used outdoors. The pump is equipped with the bottom foot so that the installation of the pump is stable.

3. Stable operation, low noise and high concentricity of components. The motor adopts low noise bearing, and has no stopping refueling device. The pump impeller has excellent dynamic balance, no vibration and improve the use environment.

No leakage. The shaft seal adopts the anti-corrosion and wear-resistant hard alloy mechanical seal, solves the serious leakage problem of the centrifugal pump packing, extends the service life and ensures the clean and tidy running site:

5. Convenient maintenance. Do not disassemble the pipe, as long as remove the pump cover nut, remove the motor and the transmission component to repair and maintain.

6. According to the conditions of the site, the pump can be installed in a vertical, horizontal and multi-way, according to the requirements of flow lift, adopt and concatenate methods to increase the required flow

Application of imported centrifugal pipeline clean water pump:

Pump parts with stainless steel plate, the laser welding and become, and are available in a variety of grades of stainless steel is chosen, and single-stage centrifugal pump application is very extensive, mainly is suitable for the conveying of clean water and corrosive liquid, can be used for residential water and pressurization, industrial boiler feed water, air-conditioning circulating water system, water treatment and reverse osmosis systems, food industry, pharmaceutical and industrial water

imported centrifugal pipeline clean water pump German BACH BACH after sales service:

First- service casts the first- enterprise to make the customer have no worries.

1. Supply the certificate of qualification, nameplate, inspection report, certificate of origin and installation instruction of the products according to the contract requirements.

2. In the process of acceptance of the products, if the customer is not in conformity with the contract requirements, we shall give the customer the treatment within two hours after receiving the notice from the customer.

3. We provide the product quality guarantee period of over 12 months, and the time will be calculated from the date of acceptance.

4. With the correct installation and use, the company will be responsible for the product quality problems.

Four big reasons to choose Bach in Germany:

1: progressive sustainability

Review Bach rapidly progressive growth each year in China, a large foreseeable production and sales of the establishment and development of the enterprise, will the valve market in China and even the machinery industry.

2. Reliability

The reliability of German Bach and the performance of products is an important part of the company's business philosophy. Delivery on schedule, continuous operation, high quality, all passed strict comprehensive test. This is why Bach is developing at a high speed and can provide better and better quality products and services.

3: price

Modern factory high-end automatic numerical control production line to ensure valve and its accessories are reasonable price, good quality.

And continuous investment in manpower, equipment plant, providing customers with high quality and high quality valves.

4: customer values

Centralized procurement reduces overall procurement costs.

Convenient procurement, help customers optimize the allocation of human resources, achieve streamlined and efficient.

Minimize customer inventory by using Bach's ample inventory.

High quality valves will help to avoid downtime due to shoddy products.